Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO Part # 15282
Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO
Part Number: 15282
Shaft Size: 20mm
Manufacturer: Singer (SIMANCO - Singer Manufacturing Company)
Condition: Vintage original parts - see condition grades below
About This Hand Wheel
This is an authentic Singer 9-spoke hand wheel, manufactured by SIMANCO (Singer Manufacturing Company). These classic hand wheels were standard equipment on some of Singer's most beloved vintage sewing machines from the early to mid-20th century. The distinctive 9-spoke design is both functional and iconic, representing the golden age of American sewing machine manufacturing.
The hand wheel (also called a balance wheel or flywheel) is the large wheel on the right side of your sewing machine that you turn by hand to raise and lower the needle, position fabric, or manually operate the machine. It's an essential component that connects to the machine's drive mechanism.
Compatibility - Fits Singer Models:
- Singer 15 series (including 15-88, 15-90, 15-91, 15-86, etc.)
- Singer 28 and 128 series
- Singer 66 series (late models with 20mm shaft)
- Singer 99 series
- Other vintage Singer models with 20mm hand wheel shaft
Important: This hand wheel fits a 20mm shaft. Please verify your machine's shaft diameter before ordering. Early Singer 66 models may have used a different shaft size.
Condition Grading System
Since these are vintage original parts, condition varies. We grade each hand wheel to help you choose the right one for your needs:
Grade A - Excellent Condition:
- Minimal wear and patina
- Clean, smooth surface with original finish largely intact
- Little to no rust or pitting
- Ready to install and use immediately
- Best choice for restorations or machines in excellent condition
Grade B - Very Good Condition:
- Light to moderate patina and surface wear consistent with age
- Some minor rust spots or light pitting possible
- Fully functional with no structural issues
- May benefit from light cleaning or polishing
- Great choice for working machines where perfect cosmetics aren't critical
Grade C - Good Condition:
- Moderate to heavy patina, rust, or pitting
- Visible age and wear, authentic vintage character
- Fully functional - spins freely and works properly
- May require cleaning or restoration work for best appearance
- Budget-friendly option for machines that need a working hand wheel
All grades are fully functional. The grading reflects cosmetic condition only.
Why Choose an Original Singer Hand Wheel?
Authentic SIMANCO Quality: These hand wheels were manufactured by Singer to exacting standards. The casting quality, balance, and fit are superior to modern reproductions.
Perfect Fit: Original Singer parts are designed specifically for Singer machines, ensuring proper fit and smooth operation.
Historical Authenticity: If you're restoring a vintage Singer to original condition, an authentic SIMANCO hand wheel is essential for maintaining the machine's value and authenticity.
Built to Last: These hand wheels have already proven their durability - many are 60-100+ years old and still spinning smoothly. With proper care, they'll last another lifetime.
Installation
The hand wheel attaches to the machine's main shaft with a setscrew or clutch mechanism (depending on your model). Installation typically requires:
- Removing the old hand wheel (loosen setscrew or release clutch)
- Sliding the new hand wheel onto the 20mm shaft
- Aligning properly and tightening the setscrew or engaging the clutch
- Testing for smooth rotation and proper engagement
If you're unfamiliar with hand wheel replacement, consult your machine's service manual or a qualified sewing machine technician.
Specifications
- Part Number: Singer 15282
- Manufacturer: SIMANCO (Singer Manufacturing Company)
- Shaft Size: 20mm
- Design: 9-spoke classic style
- Material: Cast metal
- Condition: Vintage original - see grade options
- Weight: Approximately 2 lbs
What You'll Receive
One (1) original Singer 9-spoke hand wheel in the condition grade you select. The hand wheel will be carefully packaged to prevent damage during shipping.
Note: Due to the vintage nature of these parts, each hand wheel is unique. Photos show representative examples. Your hand wheel will match the condition grade description but may have slightly different patina patterns or wear characteristics.
Care & Maintenance
To preserve your vintage hand wheel:
- Clean with a soft cloth and mild cleaner if needed
- Apply a light coat of machine oil or wax to prevent future rust
- Avoid harsh chemicals that could damage the original finish
- Store in a dry environment when not in use
Restore your vintage Singer to smooth, reliable operation with an authentic SIMANCO hand wheel!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO Part # 15282
Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO Part # 15282
Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO
Part Number: 15282
Shaft Size: 20mm
Manufacturer: Singer (SIMANCO - Singer Manufacturing Company)
Condition: Vintage original parts - see condition grades below
About This Hand Wheel
This is an authentic Singer 9-spoke hand wheel, manufactured by SIMANCO (Singer Manufacturing Company). These classic hand wheels were standard equipment on some of Singer's most beloved vintage sewing machines from the early to mid-20th century. The distinctive 9-spoke design is both functional and iconic, representing the golden age of American sewing machine manufacturing.
The hand wheel (also called a balance wheel or flywheel) is the large wheel on the right side of your sewing machine that you turn by hand to raise and lower the needle, position fabric, or manually operate the machine. It's an essential component that connects to the machine's drive mechanism.
Compatibility - Fits Singer Models:
- Singer 15 series (including 15-88, 15-90, 15-91, 15-86, etc.)
- Singer 28 and 128 series
- Singer 66 series (late models with 20mm shaft)
- Singer 99 series
- Other vintage Singer models with 20mm hand wheel shaft
Important: This hand wheel fits a 20mm shaft. Please verify your machine's shaft diameter before ordering. Early Singer 66 models may have used a different shaft size.
Condition Grading System
Since these are vintage original parts, condition varies. We grade each hand wheel to help you choose the right one for your needs:
Grade A - Excellent Condition:
- Minimal wear and patina
- Clean, smooth surface with original finish largely intact
- Little to no rust or pitting
- Ready to install and use immediately
- Best choice for restorations or machines in excellent condition
Grade B - Very Good Condition:
- Light to moderate patina and surface wear consistent with age
- Some minor rust spots or light pitting possible
- Fully functional with no structural issues
- May benefit from light cleaning or polishing
- Great choice for working machines where perfect cosmetics aren't critical
Grade C - Good Condition:
- Moderate to heavy patina, rust, or pitting
- Visible age and wear, authentic vintage character
- Fully functional - spins freely and works properly
- May require cleaning or restoration work for best appearance
- Budget-friendly option for machines that need a working hand wheel
All grades are fully functional. The grading reflects cosmetic condition only.
Why Choose an Original Singer Hand Wheel?
Authentic SIMANCO Quality: These hand wheels were manufactured by Singer to exacting standards. The casting quality, balance, and fit are superior to modern reproductions.
Perfect Fit: Original Singer parts are designed specifically for Singer machines, ensuring proper fit and smooth operation.
Historical Authenticity: If you're restoring a vintage Singer to original condition, an authentic SIMANCO hand wheel is essential for maintaining the machine's value and authenticity.
Built to Last: These hand wheels have already proven their durability - many are 60-100+ years old and still spinning smoothly. With proper care, they'll last another lifetime.
Installation
The hand wheel attaches to the machine's main shaft with a setscrew or clutch mechanism (depending on your model). Installation typically requires:
- Removing the old hand wheel (loosen setscrew or release clutch)
- Sliding the new hand wheel onto the 20mm shaft
- Aligning properly and tightening the setscrew or engaging the clutch
- Testing for smooth rotation and proper engagement
If you're unfamiliar with hand wheel replacement, consult your machine's service manual or a qualified sewing machine technician.
Specifications
- Part Number: Singer 15282
- Manufacturer: SIMANCO (Singer Manufacturing Company)
- Shaft Size: 20mm
- Design: 9-spoke classic style
- Material: Cast metal
- Condition: Vintage original - see grade options
- Weight: Approximately 2 lbs
What You'll Receive
One (1) original Singer 9-spoke hand wheel in the condition grade you select. The hand wheel will be carefully packaged to prevent damage during shipping.
Note: Due to the vintage nature of these parts, each hand wheel is unique. Photos show representative examples. Your hand wheel will match the condition grade description but may have slightly different patina patterns or wear characteristics.
Care & Maintenance
To preserve your vintage hand wheel:
- Clean with a soft cloth and mild cleaner if needed
- Apply a light coat of machine oil or wax to prevent future rust
- Avoid harsh chemicals that could damage the original finish
- Store in a dry environment when not in use
Restore your vintage Singer to smooth, reliable operation with an authentic SIMANCO hand wheel!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Original Singer 9 Spoke Hand Wheel - Genuine SIMANCO
Part Number: 15282
Shaft Size: 20mm
Manufacturer: Singer (SIMANCO - Singer Manufacturing Company)
Condition: Vintage original parts - see condition grades below
About This Hand Wheel
This is an authentic Singer 9-spoke hand wheel, manufactured by SIMANCO (Singer Manufacturing Company). These classic hand wheels were standard equipment on some of Singer's most beloved vintage sewing machines from the early to mid-20th century. The distinctive 9-spoke design is both functional and iconic, representing the golden age of American sewing machine manufacturing.
The hand wheel (also called a balance wheel or flywheel) is the large wheel on the right side of your sewing machine that you turn by hand to raise and lower the needle, position fabric, or manually operate the machine. It's an essential component that connects to the machine's drive mechanism.
Compatibility - Fits Singer Models:
- Singer 15 series (including 15-88, 15-90, 15-91, 15-86, etc.)
- Singer 28 and 128 series
- Singer 66 series (late models with 20mm shaft)
- Singer 99 series
- Other vintage Singer models with 20mm hand wheel shaft
Important: This hand wheel fits a 20mm shaft. Please verify your machine's shaft diameter before ordering. Early Singer 66 models may have used a different shaft size.
Condition Grading System
Since these are vintage original parts, condition varies. We grade each hand wheel to help you choose the right one for your needs:
Grade A - Excellent Condition:
- Minimal wear and patina
- Clean, smooth surface with original finish largely intact
- Little to no rust or pitting
- Ready to install and use immediately
- Best choice for restorations or machines in excellent condition
Grade B - Very Good Condition:
- Light to moderate patina and surface wear consistent with age
- Some minor rust spots or light pitting possible
- Fully functional with no structural issues
- May benefit from light cleaning or polishing
- Great choice for working machines where perfect cosmetics aren't critical
Grade C - Good Condition:
- Moderate to heavy patina, rust, or pitting
- Visible age and wear, authentic vintage character
- Fully functional - spins freely and works properly
- May require cleaning or restoration work for best appearance
- Budget-friendly option for machines that need a working hand wheel
All grades are fully functional. The grading reflects cosmetic condition only.
Why Choose an Original Singer Hand Wheel?
Authentic SIMANCO Quality: These hand wheels were manufactured by Singer to exacting standards. The casting quality, balance, and fit are superior to modern reproductions.
Perfect Fit: Original Singer parts are designed specifically for Singer machines, ensuring proper fit and smooth operation.
Historical Authenticity: If you're restoring a vintage Singer to original condition, an authentic SIMANCO hand wheel is essential for maintaining the machine's value and authenticity.
Built to Last: These hand wheels have already proven their durability - many are 60-100+ years old and still spinning smoothly. With proper care, they'll last another lifetime.
Installation
The hand wheel attaches to the machine's main shaft with a setscrew or clutch mechanism (depending on your model). Installation typically requires:
- Removing the old hand wheel (loosen setscrew or release clutch)
- Sliding the new hand wheel onto the 20mm shaft
- Aligning properly and tightening the setscrew or engaging the clutch
- Testing for smooth rotation and proper engagement
If you're unfamiliar with hand wheel replacement, consult your machine's service manual or a qualified sewing machine technician.
Specifications
- Part Number: Singer 15282
- Manufacturer: SIMANCO (Singer Manufacturing Company)
- Shaft Size: 20mm
- Design: 9-spoke classic style
- Material: Cast metal
- Condition: Vintage original - see grade options
- Weight: Approximately 2 lbs
What You'll Receive
One (1) original Singer 9-spoke hand wheel in the condition grade you select. The hand wheel will be carefully packaged to prevent damage during shipping.
Note: Due to the vintage nature of these parts, each hand wheel is unique. Photos show representative examples. Your hand wheel will match the condition grade description but may have slightly different patina patterns or wear characteristics.
Care & Maintenance
To preserve your vintage hand wheel:
- Clean with a soft cloth and mild cleaner if needed
- Apply a light coat of machine oil or wax to prevent future rust
- Avoid harsh chemicals that could damage the original finish
- Store in a dry environment when not in use
Restore your vintage Singer to smooth, reliable operation with an authentic SIMANCO hand wheel!
